<Description>
The IC502w pan/tilt IP Network Camera is designed with the "user-friendly" idea deep in mind. The user can install the IC502w easily on his/her home network and then access the IP Camera anywhere in the world through the accompanied video management software-CamView without setting some complicated DNS name or changing the router's settings. It's just a plug & play action.
With 3GPP/ISMA support, users can see the video of the IP camera on any 3G mobile phone anywhere, anytime. The big difference is that there is software for downloading to the mobile phone so that the fixed IP address is not needed for the IP camera. The video settings including frame rate, resolution and bandwidth could be different for PC monitoring and mobile viewing.
With pan/tilt support, users can monitor the video in a much larger viewing angle range.
For indoor surveillance and remote monitoring, the IC502w provides the best image quality in its class, and excellent performance. The IC502w IP Camera also provides the best bandwidth efficiency, it offers 640x480 resolution, 30 fps frame rate, real MPEG4 image compression ability. The built-in microphone enables remote users to not only view, but also listen for additional monitoring options.
The NAS storage function can easily turn any NAS device to a NVR device. The schedule function provides full scheduling of email/ftp sending, motion detection and NAS recording event. With the built-in Web server, the IC202w IP Cameras can also be managed from a standard web browser on a Windows computer. With the ActiveX support, users can also see the video display on the Windows IE browser.
The IC502w IP Camera provides both wireless IEEE 802.11 b/g and wired Ethernet network interfaces for flexible installation. It supports the WEP and WPA (Wi-Fi Protected Access) security modes to provide the best security for wireless networks.
The IC502w IP Camera provides motion detection function. Users can easily setup this function and receive the notification with the snapshot images through email and/or ftp when some motion events are detected.
The IC502w IP camera is ideal for securing small businesses, home offices and residences over a local area network and/or the Internet.

<Features >
- Easily access the camera from anywhere in the world via the ID/password (Through accompanied video management software, no complicated DNS settings needed )
- 3GPP/ISMA support.
- Dual video streaming with separate frame rate/resolution/bandwidth settings for PC and mobile.
- Wide range Pan/tilt motion control.
- 802.11 b/g wireless with WEP and WPA security support.
- Connect up to 20 users simultaneously.
- Supports enhanced MPEG-4 compression.
- Supports resolution of up to 640x480 pixels at 30 fps.
- Free video management software CamView accompanied for easy access and multi-camera management.
- View video from your Wireless or wired Ethernet network.
- ActiveX video display in Microsoft IE browser.
- Motion Detection and E-mail/FTP notification.
- Bulit-in real-time clock. Can also synchronize the time.
- Through NTP protocol.
- Built-in Web server for managing via standard web browser.
- Built-in micro-SD card interface for video storage on SD card.
- Built-in microphone for synchronized audio.
- Event scheduling.
- NAS storage access.
- Online Firmware upgrade, will enter safe mode when power is off during critical firmware upgrade point.
- Watchdog function to prevent system failure.

<Specification>
Models IC502w
Power DC 5V, 2A
Processors RISC CPU, hardware video processing and compression.
Network interface Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
Wireless interface IEEE 802.11g 6 - 54 Mbps
IEEE 802.11b 1 - 11 Mbps
Transmit power:
14.5dBm typically @ 802.11g
17.5dBm typically @ 802.11b
Receiver sensitivity:
54Mbps: Typical -73dBm @ 10% PER
11Mbps: Typical -86dBm @ 10% PER
Antenna gain: 1.8 dBi
Pan/Tilt control Pan range 130° ( -65° ~ 65° )
Tilt range 90° ( 0° ~ 90° )
Auto pan mode
Auto patrol mode
Image sensor RGB VGA 1/4 inch CMOS
Automatic exposure control, automatic white balance, automatic gain control, automatic brightness control.
Light sensitivity 0.2 Lux
Lens 3.2 mm, F2.0, viewing angle: 60.3°, fixed iris.
focus range: 30 cm to infinity
D/I D/O interface 1 D/I for alarm detection
1 D/O for alarm triggering
Micro-SD card interface Micro-SD card interface for local video storage
The supported Micro SD-Card capacity is up to 16G bytes.
Buttons One reset button, to factory default settings
Indicators One LED for internet connection status indication
One LED for Ethernet connection indication
Enable/disable - web configurable
Video compression MPEG-4 Part 2 (ISO/IEC 14496-2) with motion detection, profiles: Simple Profile, level 0-3
Frame rate Up to 30 fps in all resolutions
Video streaming MPEG-4
Separate frame rate/resolution/bandwidth settings for PC and mobile.
Video settings Resolution: VGA(640x480), QVGA(320x240), QQVGA(160x120)
Bandwidth : 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M bps
Frame rate : 5, 10, 15, 20, 25, 30 fps
Audio Built-in microphone for audio monitoring
Audio compression:
MP2 audio, AMR-NB for 3GPP/ISMA(RTSP streaming)
Security Web management username/password protection
Video display ID/password protection
WiFi WEP and WPA security mode
Installation, management and maintenance Installation tool on CD and Web-based configuration
Automatic configuration backup and restore
Video management software-CamView for video access and multi-camera management Firmware upgrades via FTP
Minimum Web browsing and management software requirements Built-in web server for standard web browser access Pentium 4(or equivalent AMD) CPU 1.0 GHz or higher, 1 GB RAM
Supported protocols IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, IGMP, RTCP, SMTP, SNTP, FTP, DHCP, UPnP, ARP, DNS, PPPoE, etc.
Accessories (included) Power adaptor, RJ45 ethernet cable, quick installation guide, CD with installation tool/software and User's Manual, ID/Password card.
Video management software Surveillance application for viewing and archiving up to 16 cameras
Users Up to 20 simultaneous unicast users(depends on video settings)
Alarm and event management Events triggered by video motion detection
Notification/upload of JPEG images over FTP and/or email
Dimensions (HxWxD) and weight 120 x 91 x 84 mm,
350 g, camera body only.
Approvals EMC - CE, FCC Part 15 Subpart B Class B
Wireless RF - CE, FCC Part 15 Subpart C
Power supply: CE, FCC, UL, EN 60950
Operating conditions 0-50°C
Humidity 20 - 80% RH (non-condensing)

<Performance Info>
Video Performance Information
The video quality is dependent on the video parameter settings and the network quality. If you want to have a better video quality, you will usually set higher resolution and higher frame rate. This is fine when you are viewing the video locally in the same network. But when you want to see the video remotely through the Internet, you need to know the Internet speed (bandwidth) connected to your home network. If the "Internet speed" setting of your IP camera is very large, but your real Internet speed (bandwidth) is relatively low, the video quality could be very bad. In some worst case, the video display could be disconnected. In order to have the best video quality, you better have broadband service from your ISP and set the "Internet speed" of the IP camera a little lower than the real Internet speed provided by your ISP.
Also need to notice that when multiple users are displaying the videos from the same IP camera at the same time, the video bandwidth times number of users will be needed for the Internet speed.
WiFi Performance Information
The WiFi performance is dependent on the distance between the IP camera and the AP (Access Point) / router and dependent on the number of devices connected to the AP/router. Also need to consider that if there are any barriers like wall or floor between the IP camera and the AP/router. IF there are some open space between the IP camera and the AP/router, you also need to know that the performance will be interfered in rainy day. The antenna gain and it's direction in the AP/router will also affect the WiFi performance. In general case, when the IP camera is set to the default video setting ( 256k bps) and there are no other interferences between the IP camera and the AP/router, the working straight distance is about 100 meters between IP camera and the AP/router.